skip to main text

Connection Using WPS (PIN code)

  1. Hold down the RESUME/CANCEL button (A) on the printer until the POWER lamp (B) flashes 6 times, then release the RESUME/CANCEL button after the sixth flash.

    The wireless connection setting information including the PIN code will be printed.

    figure: Press and hold the RESUME/CANCEL button and the POWER lamp flashes 6 times

  2. Hold down the RESUME/CANCEL button on the printer until the POWER lamp flashes 8 times, then release the RESUME/CANCEL button after the eighth flash.

    figure: Press and hold the RESUME/CANCEL button and the POWER lamp flashes 8 times

  3. Follow the on-screen instructions on the device (such as a smartphone) to set the WPS PIN CODE described on the printed Network Configuration Page to the wireless router.

  4. Make sure that the Wi-Fi lamp (C) on the printer is lit.

    figure: The Wi-Fi lamp lights up

    If the Alarm lamp lights up, refer to "Troubleshooting."

The network connection setup is now complete.